Page 1 of 1

Spackers! (Sounds emitting things)

Posted: August 17th, 2014, 20:25
by friznit
Hello 5punkers. I have had some Cambridge Soundworks DTT2200 5.1 speakers for over 15 years and they've been excellent. Sadly it seems the pot on the volumator is going, which is giving rage inducing volume spikes. All the other bits are in fine fettle. I've been unable to find spare parts and am no dab hand with a soldering iron. I attempted eBay to find some cheapish replacements but it just seems to be a waiting game followed by spam bidding in the last 30 mins which is also rage inducing, so I sacked that off pretty quickly. I think I may have run out of 'fix it' options and have to bite the bullet and buy some new speackers. What would 5punk recommend?

Re: Spackers! (Sounds emitting things)

Posted: August 17th, 2014, 20:33
by Dog Pants
God, my speakers are as old as yours. I've no idea, but I'm interested in seeing what people come up with.

Re: Spackers! (Sounds emitting things)

Posted: August 17th, 2014, 20:42
by buzzmong
Amusingly, I too have the same set of speakers and the same problem.
I thought was down to a rather old sound card but as I got a new one a couple of months back and the problem persists I suspect I have the issue as Fwiz, which I hadn't actually considered was speaker related until now.

Re: Spackers! (Sounds emitting things)

Posted: August 17th, 2014, 21:39
by friznit
GoogleFu says it's a fairly common problem with these spearkers when they get old. It also then goes on to talk about pots, resistors and solder, which scares me a bit. Mind you, since the only alternative is to bin the speakers and buy new, I have little to lose by fucking it up trying to fix things.
Buy:
1-wires to connect components
2-potentiometer B20k or B30k
3-two 15k resistors
4-switch

You need to desolder the old potentiometer in the vol control box, then follow the steps below.

If you put the old poteniometer with legs facing up and the vol control rod to your right, you will see 3 columns of pins. From left to right

1st column : the two pins positions are the switch(on/off)
2nd column: The three pins positions are connected to the new potentiometer(make sure middle pin connected to middle hole)
3rd column: the three pins positions are connected to the two 15k resistor. one bwtween the top hole and middle hole and another one between the middle and bottom hole

Re: Spackers! (Sounds emitting things)

Posted: August 19th, 2014, 20:47
by ProfHawking
Hmm.
I expect if you look in the right places you'll be able to get a direct replacement for the faulty pot. without having to mess with adding switches or resistors. Something like thismaybe, which should make removing the old one and swapping for a new one pretty simple.

I have a new fancypants soldering iron, and a rough idea of how to use it. Happy to help if you fancy, and you aren't too far away are you Friz, still in Ealing?

Re: Spackers! (Sounds emitting things)

Posted: August 20th, 2014, 18:29
by friznit
Moved to West Drayton but may well take you up on the offer. If anything it'd be an excuse for a beer or two. I'll see if I can find the parts.

Edit: fuck knows if that thing you linked is what I need, but bought anyway

Re: Spackers! (Sounds emitting things)

Posted: August 20th, 2014, 19:47
by ProfHawking
Ah, well i expected to check its the right size etc before you ordered! But hopefully its pretty much the right thing. Let me know when it arrives and can sort out a drunken soldering evening. (The best way to fix knackered electronics).

/edit Oh and if it works can do the same thing on Buzz's knob. Fnar fnar

Re: Spackers! (Sounds emitting things)

Posted: August 20th, 2014, 21:29
by friznit
Meh, only a fiver. If it's wrong it can sit on the shelf as a testament to my ignorance.

Re: Spackers! (Sounds emitting things)

Posted: August 22nd, 2014, 18:34
by friznit
A spikey wiggly thing arrived in the post today. I also received the new pot doohicky. It look at first sight like it'll fit inside the casing of the volumator. I'm hesitant to go on the offensive with my driver of screws for fear of reprisals, so for now I shall establish an observation post and watch out for any sudden movements.

Re: Spackers! (Sounds emitting things)

Posted: August 23rd, 2014, 7:50
by ProfHawking
Excellent job sah. Time to discuss offensive tactics over a beer. You fancy popping over on Sunday?

Re: Spackers! (Sounds emitting things)

Posted: August 23rd, 2014, 8:33
by friznit
Unfortunately away this weekend. You around next weekend?

Re: Spackers! (Sounds emitting things)

Posted: August 23rd, 2014, 10:26
by ProfHawking
Yeah should be fine on sat I think.

Re: Spackers! (Sounds emitting things)

Posted: August 30th, 2014, 15:47
by friznit
Working brilliantly Prof. Many thanks for fixing!

Re: Spackers! (Sounds emitting things)

Posted: August 30th, 2014, 18:31
by ProfHawking
Good stuff!
no bother and happy to help

Re: Spackers! (Sounds emitting things)

Posted: August 1st, 2015, 16:35
by buzzmong
So, I definitely need to fix mine now :)

Anyone got a part number for the correct pot? Soldering's easy, I just need the actual pot.